Toyota Land Cruiser 1FZ-FE 4.5L Petrol Cylinder Heads & Engine Parts

Replacement cylinder heads, head gasket sets and engine components for Toyota Land Cruiser models fitted with the 1FZ-FE 4.5L six-cylinder petrol engine.

Fits — Toyota 1FZ-FE 4.5L Petrol (24-Valve DOHC)

  • Toyota Land Cruiser 80 Series (FZJ80): 1992–1998 (1FZ-FE 4.5L petrol, distributor ignition)
  • Toyota Land Cruiser 100 / 105 Series (FZJ100 / FZJ105): 1998–2007 (1FZ-FE 4.5L petrol, coil-pack ignition)

Important fitment note: Confirm whether your engine uses the earlier 80 Series distributor casting or the later 100 Series coil-pack casting before ordering a cylinder head.

Free delivery Australia-wide from our Melbourne warehouse, or pickup from our Bellevue, Perth workshop. (Please note: Parts and machining only — we do not offer mechanical vehicle fitting.)

Need parts advice or workshop reconditioning? We offer full cylinder head resurfacing and reconditioning in Bellevue, Perth. Call John on 0406 611 288 with your vehicle details and advise whether it runs on petrol or dual-fuel LPG.

Browse Toyota 1FZ-FE 4.5L Parts

New 1FZ-FE 4.5L Bare Cylinder Head – Land Cruiser 80 Series (Distributor Type)

Toyota land cruiser 1fz-fe 80 series bare cylinder head

Brand-new aftermarket bare cylinder head casting for Land Cruiser FZJ80 (1992–1998). Supplied with valve seats and guides installed for distributor-ignition 1FZ-FE 4.5L petrol engines.

  • Bare casting with seats & guides: Valves, springs, retainers, camshafts, shim tappets, gaskets and bolts are NOT included
  • Direct-fit casting: Pressure-tested, precision-machined, no modifications required
  • Sold outright: 12-month warranty, no core exchange required

Free delivery Australia-wide. Perth pickup also available in Bellevue.

$990.00

Shop at CHS

⚡ Dispatched via courier every weeknight

New 1FZ-FE 4.5L Bare Cylinder Head – Land Cruiser 100 / 105 Series (Coil-Pack Type)

Toyota land cruiser 1fz-fe 100 series bare cylinder head

Brand-new aftermarket bare cylinder head casting for Land Cruiser FZJ100 / FZJ105 (1998–2007). Supplied with valve seats and guides installed for coil-pack ignition 1FZ-FE 4.5L petrol engines.

  • Bare casting with seats & guides: Valves, springs, retainers, camshafts, shim tappets, gaskets and bolts are NOT included
  • Direct-fit casting: Pressure-tested, precision-machined, no modifications required
  • Sold outright: 12-month warranty, no core exchange required

Free delivery Australia-wide. Perth pickup also available in Bellevue.

$990.00

Shop at CHS

⚡ Dispatched via courier every weeknight

New 1FZ-FE 4.5L Complete Cylinder Head Kit – Land Cruiser 80 Series (Distributor Type)

1fz-fe 80 series assembled cylinder head with vrs gasket set and head bolts

Complete 1FZ-FE 80 Series rebuild solution — ready to install. Brand-new assembled cylinder head with dual camshafts fitted and tappet clearances preset, supplied with a VRS gasket set and new head bolts for distributor-ignition FZJ80 models (1992–1998).

  • Australian-assembled: Dual camshafts, shim tappets, valves, springs, retainers and seals fitted with clearances preset
  • Complete installation kit: VRS head gasket set and new single-use torque-to-yield head bolts included
  • Sold outright: Pressure-tested, 12-month warranty, no core exchange required

Free delivery Australia-wide. Perth pickup also available in Bellevue.

$2,690.00

Shop at CHS

⚡ Dispatched via courier every weeknight

New 1FZ-FE 4.5L Complete Cylinder Head Kit – Land Cruiser 100 / 105 Series (Coil-Pack Type)

1fz-fe 100 series assembled cylinder head with vrs gasket set and head bolts

Complete 1FZ-FE 100 / 105 Series rebuild solution — ready to install. Brand-new assembled cylinder head with dual camshafts fitted and tappet clearances preset, supplied with a VRS gasket set and new head bolts for coil-pack ignition models (1998–2007).

  • Australian-assembled: Dual camshafts, shim tappets, valves, springs, retainers and seals fitted with clearances preset
  • Complete installation kit: VRS head gasket set and new single-use torque-to-yield head bolts included
  • Sold outright: Pressure-tested, 12-month warranty, no core exchange required

Free delivery Australia-wide. Perth pickup also available in Bellevue.

$2,690.00

Shop at CHS

⚡ Dispatched via courier every weeknight

1FZ-FE 4.5L VRS Head Gasket Set with Head Bolts (80 & 100 Series)

Land cruiser 1fz-fe vrs head gasket set with head bolts for 80 and 100 series

Complete VRS cylinder head gasket set with head bolts. Supplied with both sizes of spark-plug tube seals to suit both 80 Series (distributor) and 100 / 105 Series (coil-pack) 1FZ-FE 4.5L petrol engines.

  • Complete VRS gasket set: Graphite cylinder head gasket, both spark-plug tube seal sizes, rocker cover gasket, inlet & exhaust manifold gaskets, valve stem seals and O-rings
  • Head bolts included: New high-tensile, single-use torque-to-yield head bolts
  • 12-month warranty: Ready for immediate dispatch

Free delivery Australia-wide. Perth pickup also available in Bellevue.

$220.00

Shop at CHS

⚡ Dispatched via courier every weeknight

Cylinder Head Machining & Reconditioning

Prefer to have your existing Toyota 1FZ-FE cylinder head assessed? Bring your head to our Bellevue, Perth workshop for inspection, pressure testing, resurfacing or full reconditioning (parts and workshop services only; no mechanical vehicle fitting).

1FZ-FE Cylinder Head Machining / Resurfacing

Machine the face of your toyota 1fz-fe cylinder head

Precision face machining at our Bellevue, Perth workshop. Machining restores a flat, true sealing surface for reliable head gasket clamping.

  • Precision surface finishing: Restores flat cylinder head sealing face
  • Fast workshop turnaround: Drop your cylinder head into our Bellevue workshop — no appointment needed
  • Licensed cylinder head machinists with 30+ years of experience

Perth workshop drop-off and pickup in Bellevue.

From $276.00

Call 0406 611 288

🔧 Bellevue, Perth Workshop Service

1FZ-FE Cylinder Head Reconditioning

Recondition your toyota 1fz-fe cylinder head

Complete Toyota 1FZ-FE 4.5L cylinder head reconditioning in Bellevue, Perth. Bring your existing cylinder head to our workshop for full assessment, pressure testing, valve work and machining to OEM specifications (LPG valve seat upgrades available).

  • Full workshop rebuild: Pressure testing, crack detection, valve guide and seat work, and precision resurfacing
  • Tailored repair quote: Work required and final price depend on the condition of your cylinder head
  • Licensed cylinder head reconditioners with 30+ years of experience

Perth workshop drop-off and pickup in Bellevue.

From $1,080.00

Call 0406 611 288

🔧 Bellevue, Perth Workshop Service